So far, ID-Cooling has inspired us with the price presented in the Frostflow 120L, then turned around and introduced the IS-VC45 cooler which, even with the highest hopes at first, did not impress us too much. However, they still have a bullet in the room. We’re back with the Frostflow series, this time with a much larger radiator. In fact, the kit we are going to check here is also the basis of the Hunter Duet that cools a CPU and GPU in an unmarried cycle, also proposed through ID-Cooling.
If you missed your last IAO to cross the bank, let’s catch up with you a little bit. We found that the chiller was very profitable in a market where similar chillers were much more expensive. We also found that they have not replaced the flavor of the fundamental unit, will offer a Comet-Tail LED display on the main unit and will continue to place those red LEDs with bright red rings on the fans provided. Although the Frostflow 120L was not a stellar artist, it was able to protect itself and fall on the charts right where we expected.
Well, it’s time to move on from what we know the Frostflow 120L was capable of doing and moving on to ever bigger things. Today, we offer THE Frostflow 240L Frostflow 240L closed-circuit cooler from ID-Cooling. This is a 120mm dual radiator formula designed not only for the thermal load of almost every processor on the market today, as mentioned, feel that it works so well that they will also offer this kit with a main GPU unit and mounting board attached. to this cooler, sold by another name. However, from what we’ve just seen from Corsair, they’ve cornered the game a lot in the AIO game right now, and that increases the odds against ID-Cooling, but let’s see what this cooler can do before making a final judgment.
The Frostflow 240L closed-circuit cooler is capable, with the hardware provided, to fit the newest and newest Intel LGA775 plugs, and for AMD users, anything from AM2 is also a fair game. The TDP score has gone from 150W to 120L to now 200W in this 240L. The dimensions increase up to 274 mm in the length of the radiator, it is still 120 mm wide and also has 27 mm thickness, and of course aluminum. Connecting the radiator to the main ID-Cooling unit uses 315 mm long EPMD rubber tubes, which are attached to both ends with plastic collars. The main unit is 65 mm in diameter and measures 36 mm more than the IHS in the processor, and the copper pump and bloodless plate are contained in a black plastic case. Speaking of bombs, those force boxes with 0.25 A of fire and are able to reach speeds of up to 2500 rpm.
This time, we are sent a pair of enthusiastic ID-12025M12S 120 mm to cool this 240mm radiator. These enthusiasts rotate to a diversity of 800 to 2000 rpm delivering 84.5 CFM airflow each. The static voltage is also greater than 3.2 mmH2O to push through the narrow ardiversityment of the fins of those radiators. These hydraulic bearing enthusiasts are the same ones we saw in the 120L and are forged from what we have noticed in this design.
We have the same challenge with this Frostflow 240L that we had with the last shipment, however, the availability is almost zero. In the same previous searches, we can’t locate a list among the five most sensitive sites, we have a tendency to locate almost everything we need. However, once back, we discovered only a list indicating where you can get this Frostflow 240L in the US, perhaps the only source in this aspect of the world. This is re-indexed in AliExpress.com so it looks super low for the product, with a value of only $98.99. Usually, when we get a 240mm IAO, it is worth between $119.99 and $129.99, so if you like design and aesthetics in general, you can also save around $30 by opting for ID-Cooling and its Frostflow 240L on some of the most popular productive options.
The most sensitive box provides an internal cooler symbol just to the left. Above, we locate the corporate call and it’s the liquid cooling of the processor. The rear gives the call Frostflow 240L in red and a short list of features discovered in this cooler, also in red.
This appearance panel matches almost everything you see in most sensitive packages, but this time it lacks the symbol and features were distributed horizontally this time.
Around the next panel, we have 4 photographs. Moving clockwise, these photographs cover the machine’s copper base, aluminum radiator, universal appliance and other accessories included, and also show us that there are two high static pressure enthusiasts included.
The longer aspect of the box offers the coolest specification table, compatibility and even corporate data to provide consumers with all the data they can get at the point of purchase.
The last aspect of this table gives us dimensional representations. The most sensitive shows the 58 mm thickness of the enthusiasts and radiator, as well as the 65 mm diameter of the main unit. The decrease component then covers the radiators of other dimensions, as well as the height of the main units.
They also print on the back of the box. Here, he explains that enthusiasts of this type of cooler and what makes Frostflow special.
After breaking a seal, the most sensitive of the box opens and first we see the commands on a thin layer of dense foam. Below this, we place all IAO equipment, enthusiasts and elements wrapped in plastic and slipped into their own special small compartments that allow this cooler to be provided in the best conditions for testing.
The main unit has been replaced from the other model. We are presented with a cylindrical head unit that provides a more sensitive plate with the chrome ID-Cooling logo in the middle. Around the edge of the hood, there are windows that allow the Comet-Tail LED effect to occur.
To get the coolant in and out of the main unit, the tube is connected to 90-degree plastic swivel fittings. These allow a little flexibility to rotate the tube to a more comfortable state. Near the other aspect of the main unit, at the top, we see the 3-pin cable that also emanates under the hood.
The bloodless copper plate is screwed slightly into the main unit on all sides, and once it is in place, they cover it with a clear sticker to basically combat oxidation, but also to help at the end of that plate without blood.
At the moment, our bloodless dish shows apparent symptoms of mishandling. Most visual scratches on the machined surface are so severe, however, there is a transparent channel in the upper left corner. Somebody’s got to pay more attention to it.
This time, while we stretch the tape measure, we locate that the pump force cable is 9.5 inches instead of 10 in the 120L, and we also see that the tube is about a quarter of an inch shorter this time. The killers of the deal are not either, they are still long, but some consistency would be good.
In the last count, we reached 22FPI for this radiator. This is a higher number of fins and to pass the air through a compact mass like this, static tension is the key to making everything look good.
We did not discover stickers around this cooler to identify the actual manufacturer of those units, however, from this angle, we can see that they are also offering the popular 27mm thick radiator, and there is no bandage on the sides, only 3 rivets to look at. There.
We go ahead and fix the enthusiasts on the radiator so you can have a transparent view of the taste and appeal that an undeniable red ring on those can do to dress things up a little bit.
Here we have arranged the double fan Y separator in the most sensitive way with the universal back plate in the middle providing thick foam pads to insulate it from the motherboard. On the left, we have the AMD main unit brackets, Intel’s are on the right, and under the board is the mini thermal paste tube provided.
From left to right, we have bolts that cross the back plate and the motherboard, followed by straps that lock the bolts on the motherboard, and a small set of screws underneath that lock the brackets on the main unit. Then we stumbled upon the nuts to lock the cooler with the LGA2011 straps on the right. There is also a set of paper washers on the back that pass under the spacer nuts to the most sensitive of the motherboard.
As for mounting the fan, someone forgot how to count at some point. Although we have 8 shorter screws to attach the radiator to the chassis, they seem to have provided us with only 4 fan screws and that is why the last symbol only had two screws on the fan.
The consultant provided below had very clever representations of everything along the way, and if it gets stuck, there’s also enough text to help him. They also come with a list of portions to tell you what they deserve to be in the box, and technically shows that we deserve to have only one, so I guess we were lucky.
For those of you who need to think of a push/pull configuration on a cooler like this, since the drive load almost justifies adding more enthusiasts, we were sure that we would get a style number symbol as a reference. As difficult as it is to locate this cooler in this aspect of the pond, however, enthusiasts are very rare, it turns out that we cannot locate them at all.
As we have a tendency to do, we first head to the main unit meeting. Here we simply grab the Intel brackets, slide them into the slot near the bottom, cover the screw gap and send the small screw to Phillips head absolutely to lock them.
In our case, we place the plugs in the central holes of the LGA115X, but that’s it, they don’t lock in position or don’t have a polite way of preventing them from spinning.
As we did for the 120L, the curtains of this Frostflow 240L also required a set of pliers to get the correct tension in the plug. Otherwise, the main unit was simply sitting on the processor with very low voltage, it was the tests that made us pass and tighten this hardware.
The following steps are simple. Add thermal paste to the processor, place the main unit in the hardware, take the nuts and lock everything on the motherboard. In addition, there have been no challenges around the socket, it is transparent by reminiscence and, of course, there is no challenge to transparent anywhere else.
By redirecting the main unit to demonstrate the lopass of this image, we installed the kit in our D frame. Although we have already commented on the duration of the tube, there is still a lot of room to install this kit, even in the highest cases. We also leave the fan cable exposed to show how much you can spend with it.
Once we have turned on the Frostflow 240L, the Comet-Tail LED formula takes effect. It rotates counterclockwise at a fairly fast speed, while the bright LED rotates with weaker LEDs. It’s not a bad effect, but it would be great if I had other options.
I would like to thank ASUS, InWin, Patriot and Fractal Design for offering me products to with.
To see our verification method and what is happening in creating our charts, see our article on the processor method and cooler for more information.
As for the functionality of the original 240L frostflow processor, I have no complaints. This 48-degree result is 2.5 degrees above, and given the refrigerators out there and the burden of having one, the ID-Cooling solution increases through an ankle.
With our overclock applied, the Frostflow 240L has lost some flooring and still works in a very respectable way. 68.17 degrees on average, that’s smart enough for any cooler. While a dozen refrigerators offer better results, they were all more expensive when they came out, and is everything valued at about five degrees?
Only slightly higher than the average line in terms of fan noise, those enthusiasts when operating in combination offer up to 36 dB with 7.5V provided and run at 1450 rpm.
The noise increases a little when enthusiasts get a 12 V power source. Here we discovered them delivering 54 dB of noise, which is not horrible, but it shows. At that moment, the fastest we saw those enthusiasts was turning at 2000 rpm, right to the point.
The truth of what the Frostflow 240L has shown us is that it is imaginable to manufacture an IAO, to offer it delicately less expensive than others, to work admirably and to expect the soft to shine favorably upon you for your efforts. We believe that ID-Cooling has a solid foundation on which to build in the first place, they just want to market those products in wider markets so that more people can access the low value and functionality offered in such a kit. We also realize that there would possibly be a legal challenge in this aspect of the pond, because our intuition tells us that they are not sealed circuit coolers manufactured through Asetek. This means that unless you find the site strangely as we did, you may never be able to see them in this aspect of the pond.
We believe that they want some paints on the mounting apparatus, in the sense that there will have to be a way to master without problems the mullion that passes through the back plate. When we first assemble the appliance according to the instructions, you may only get things adjusted. And when the main unit installs effortlessly, the tests showed it in the form of temperatures about 8 degrees more than its closest competitor on the maps, we knew something was wrong. So we used a pair of pliers and corrected the error, drastically improving the tension of the head so that we can provide what this cooler is fully capable of doing. We would not have repeated this challenge, however, in addition to the fact that we only had two fan mounting screws, if we had not had the Frostflow 120L on hand, it would have meant a great effort for the hardware store to solve this challenge as well. Apart from those points, we ended up favoring that design.
The Frostflow 240L may not have the most productive LED scheme, nor does the mono software with LED colors or fan controls, once again, it does not attack your cash bag as other refrigerators do when launched. ID-Cooling gives you enough flavor to this set to be unique, show some of the main unit with the LED settings they offer, and the red bar matching the radiator is also attractive.
We have no doubt that those looking for the most productive price for cash in closed-circuit refrigerators for things like formula structures, or even simply to save cash to build their own formula, while a $30 difference in the overall structure is rarely much, that’s halfway through reminiscence or adding more capacity to the SSD in those versions. Overall, we’re inspired by what ID-Cooling was able to offer, even if they never reach our shores en masse, those who have access to those refrigerators check the Frostflow 240L.
Conclusion: at this point, you may not find a higher price for cash in a 240mm sealed loop cooler. The ID-Cooling Frostflow 240L may not have all the tricks, but it offers what it wants and its functionality speaks for itself.
PRICE: You can locate the products to this one for sale below.
Usa: Find another generation and a computer like this in Amazon.com
Uk: Find another generation and IT like this in Amazon.fr
Australia: find another generation and PC like this in Amazon.com.au
Canada: Find another generation and PC like this on Amazon.ca
Deutschland: Finde andere Technik- und Computerprodukte wie dieses auf Amazon.de
Chad Sebring
After a year of play, Chad messed up OC’s mistake. Overclocking requires increased cooling and Chad has had many air and water configurations. After a few years of PC parts abuse, he made the decision to check his luck and look for a review job. As an overclocking enthusiast, Chad is looking for the next step in RAM, cooling and devices.